STRATOS ALL_SYSTEMS

STRATOS

SIGNAL_OVERLAY_KIT
KIT.V0.1 // TWO GROUNDS ACTIVE

A signal-overlay kit: every element is a self-contained instrument readout that could be composited over footage and still hold. Dense mono labels, heavy grotesque numerals, segmented bars, corner brackets and hazard stripes - drawn in one ink and one signal hue.

Two things to hold on to. There is exactly one hue, and it means live - the signal colour marks what is active, selected, focused or alarming, never what is merely decorative. And every mark is flat: no glow, no blur, no radius, no gradient fade. A readout either holds or flips.

> ONE_INK + ONE_SIGNAL ZERO_RADIUS
ROLE_TOKENS / COLOUR

08

  • HUES1
  • RADIUS0PX
  • GLOWNONE
  • BLINK1.4S
  • SCAN8S
FLAT_MARKS_ONLY

NO GLOW / NO BLUR / NO RADIUS / NO FADE / STATES FLIP, THEY DO NOT EASE

READ_THIS_FIRSTCONTRACT FOR WHOEVER IMPLEMENTS

  1. These values are the system. Every token below exists in css/stratos-core.css. Use them; do not invent parallel ones.
  2. Search the marks before drawing a new one. Chip, stripe, segmented bar, readout, bracket, cross, schematic, feed row - a new element is almost always one of these eight.
  3. No ad-hoc values. No raw hex, no one-off sizes, no easing curve. Motion is steps() or linear, nothing else.
  4. Token names are roles. --ink is the foreground, near-white on black glass and near-black in daylight. --signal is the live hue, not "the orange".
  5. The signal hue is spent on live things only. Active, selected, focused, alarming. Put it on an idle element and every live element on the screen loses its meaning. The hazard stripe and the wordmark square are the only standing exceptions, which is why both are rationed.
  6. Nothing is soft. No glow, no blur, no radius, no shadow, no gradient fade. The hazard stripe's gradient is hard-stop strips, and it is the only one.
SEC.01

Colour

8 ROLE TOKENS

Eight role tokens: two grounds, two inks, one signal, one hairline, and the two inks that sit on a filled block. Every swatch shows black glass on the left and daylight glass on the right, so both themes are visible at once - and the FLIP_THEME button in the masthead flips every other specimen on the page.

--groundThe glass itself. Every mark is drawn on it.#0B0B0B#F4F2EE
--panelRaised block and the hover fill. The only lift there is.#151515#E8E5DE
--inkPrimary ink: text, filled cells, solid chips, brackets.#F4F2EE#0B0B0B
--ink-dimSecondary ink. The dimmest text allowed.#9B9B9B#595959
--signalThe one hue. Live, selected, focused, alarming - nothing else.#FF6A00#B84300
--hairlineInk at 22%: rules, cell outlines, leaders, schematic strokes.INK 22PCTINK 22PCT
--on-inkText on a solid ink block: chips and the solid button.#0B0B0B#F4F2EE
--on-signalText on a signal block. Flips polarity between grounds.#0B0B0B#F4F2EE
CONTRAST_FLOOR / BLACK GLASS - DAYLIGHT
PairBlack glassDaylightUse it for
--ink on --ground17.6:117.6:1Everything that must be read.
--ink on --panel16.3:115.7:1Text inside a raised block or a hovered row.
--ink-dim on --ground7.1:16.3:1Labels, captions, micro text. Nothing is dimmer than this.
--ink-dim on --panel6.6:15.6:1Labels inside a raised block.
--signal on --ground6.9:14.9:1Signal text, held to 14px bold or larger in both themes.
--signal on --panel6.4:14.4:1Signal marks in a raised block. Prefer the ground for signal text.
--on-signal on --signal6.9:14.9:1Labels on a signal chip or a hovered solid button.
--on-ink on --ink17.6:117.6:1Labels on an ink chip or the solid button at rest.
Black glass is the default, and it sits on bare :root. This is an overlay language - it is designed to be composited over footage, and its natural ground is the dark glass in front of it. Daylight glass is a hand-authored second ground for pages that live on a light screen: an OS light preference reaches it, and an explicit data-theme wins in either direction. It is not a derived inversion. The two neutrals swap, but the signal hue is re-cut from #FF6A00 to #B84300, because the bright cut falls to 2.6:1 on a light ground and the deeper one keeps signal text above 4.5:1. The same move flips --on-signal from near-black to near-white.
SEC.02

Typography

2 STACKS / 8 VOICES

Two stacks, both system fonts, nothing to download. A heavy grotesque for lockups and numerals, tracked in to -0.02em; the platform mono for everything that is read, small, uppercase and tracked out to +0.08em. Each voice below is set at its real size.

DISPLAY_XL / 800UNIT.3
NUM_XL / 80089
DISPLAY_LG / 800CH.40 UI-12
DISPLAY_MD / 700REF - 10040
INPUT / MONO 12ENTRY_0042
DATA / MONO 1142.08HZ  409PX  64PCT  118MS
LABEL / MONO 10SOURCE_TRACKING / BLOCK_PROCESS / LIVE_FEED
MICRO / MONO 9BLOCK RELAYED VIA NODE.4 / CHECKSUM VALID / PACKETS 4402 OF 4402 / RETRY 0 / COLD START COMPLETE
VoiceStackSize / weightTrackingWhere
.v-display-xl--font-displayclamp(56px, 9vw, 96px) / 800-0.02emThe page lockup. One per screen.
.s-num--xl--font-display--num-xl clamp(64px, 9vw, 116px) / 800-0.02emThe hero readout. Tabular figures, line-height 0.9.
.s-num--lg / --md--font-display--num-lg 56px / --num-md 44px-0.02emSecondary readouts inside a block.
.v-display-lg--font-displayclamp(30px, 5vw, 44px) / 800-0.02emBlock lockups: WORD.DIGIT, ABBREV-NUMBER.
.v-display-md--font-display24px / 700-0.02emLockup inside a console head.
.s-input--font-mono12px / 400+0.04emThe field value. The only mono above 11px.
.v-data--font-mono11px / 4000Values, feed rows, body size of the page.
.v-label--font-mono10px / 400+0.08emLabels, chips, buttons. Uppercase with underscores.
.v-micro--font-mono9px / 400+0.02emLog and annotation paragraphs in --ink-dim. The floor.
NAMING_GRAMMAR
  • UPPERCASE_UNDERSCORESOURCE_TRACKING, END_OF_TRANSMISSION
  • WORD.DIGITUNIT.3, CH.40, ACTIVE.B
  • ABBREV-NUMBERUI-12, REF - 10040
  • VALUE+UNIT42.08HZ, 64PCT, 118MS
  • PREFIX >> LIVE_FEED (live pointer)
  • PREFIX ++ AUX_CHANNEL (addable item)
The display closes in and the mono opens up, and that is the whole hierarchy. Tight heavy numerals read as instruments; small tracked mono reads as annotation. Running both directions at once separates the readout layer from the label layer without a third size, a second weight in the mono, or a colour. The underscore grammar does the rest: a label with no spaces reads as an identifier, never as a sentence.
SEC.03

Space and layout

DENSE

Instruments are dense. Inside a mark the steps are 3 to 18 pixels; between blocks the page jumps straight to 64. There is no middle register - a readout is either packed or it is a separate readout.

TokenValueNote
--measure1240pxContent ceiling, centred.
--gutter24pxSide margin and frame padding. 16px below the 480 breakpoint.
--section-gap64pxBetween sections. The only large step in the system.
breakpoints720px / 480px720 stacks multi-column clusters; 480 tightens the frame padding.
STEPS_IN_USE / INSIDE A MARK
33px
Segmented-bar gap.
44px
Chip and feed-row vertical padding.
66px
Status-dot gap, feed-row side padding.
77px
Chip side padding, marker-to-label gap.
88px
Hazard strip width, bracket-button padding.
1212px
Corner-bracket arm.
1414px
Solid-button side padding.
1818px
Between the ticks of a toggle pair.
24--gutter
Frame padding and page margin.
64--section-gap
Between sections.
The odd numbers are not a mistake. 3, 7 and 9 exist because the marks are built on a pixel grid, not a spacing scale: a 9px cell with a 3px gap is a 12px pitch, and a 9px cross needs its 1px stroke on pixel 4 to sit dead centre. Round these to a 4px scale and every segmented bar and cross goes soft by half a pixel.
SEC.04

Form

0PX RADIUS

The silhouette is a 1px line and a square corner. There is no radius anywhere, no shadow, and no elevation beyond one flat fill - a raised block is --panel, and that is the whole depth model.

HAIRLINE / 1PX --HAIRLINE

CORNER_BRACKETS / 12PX ARMS, 1PX --INK

HOVER EDGE / 1PX --INK

DISABLED / 1PX DASHED --HAIRLINE

RAISED / --PANEL FILL, NO EDGE

LEADER / 1PX DOTTED - RULE / END TICKS

PropertyValueWhy
border-radius0Everywhere, including focus rings and the status dot. A rounded corner reads as a consumer control, not an instrument.
border1pxThe only weight. Emphasis comes from swapping --hairline for --ink, never from going thicker.
focus2px --signal, offset 2pxThe one 2px line - focus is live, so it takes the live hue.
elevation--panelA flat fill one step off the ground. No shadow exists to reach for.
gradienthazard onlyHard-stop 8px strips at -45deg. Two stops at the same position, so it is a pattern, not a fade.
Flat is what makes it composite. A glow or a soft shadow is drawn assuming a known background; laid over footage it turns into a grey smear. A 1px line and a solid block survive any backdrop, which is the only thing an overlay has to do.
SEC.05

Motion

2 AUTHORED MOMENTS

Instruments, not decoration. Two authored moments - a stepped blink on live things, and one flat scan column - and every other state change is an instant flip with no transition at all.

LIVE

--T-BLINK 1.4S STEPS(1, END)

--T-SCAN 8S LINEAR / SWEEP 32PCT, DWELL 68PCT

FLIP / NO TRANSITION, :ACTIVE 1PX DOWN

TokenValueWhere
--t-blink1.4s steps(1, end)Live status dots and the block caret. On or off, never a fade.
--t-scan8s linearOne flat column crosses a hero frame in the first 32% of the cycle, then dwells off-frame.
presstranslateY(1px)Buttons on :active. The largest displacement in the system.
hoverinstantFill and edge flip in the same frame. There is no easing curve to reuse.
A readout either holds or flips. An eased transition implies the value passed through the states in between, which an instrument never claims. Stepped timing keeps motion honest, and the scan spends most of its cycle off-frame so it reads as a periodic check rather than a loop to watch. Under prefers-reduced-motion the blink stops, the scan is removed, and nothing is lost.
SEC.06

Screen

ENHANCEMENT ONLY

One optional surface treatment: interference contours. Two slow emitters ring outward across the glass and their interference is drawn as hairline contours. The pointer is a third emitter - move it across the right-hand panel and, inside a bracketed reach, the field is read out as segmented-bar cells: signal where it peaks, outline where it does not.

STATIC_FALLBACK / HAIRLINE RINGS
LIVE / MOVE THE POINTER ACROSS IT
UniformValueWhat it does
uLevels6.0Contour steps across the field's range. More reads as a fingerprint; fewer loses the interference.
uWave34.0 rad / heightEmitter spatial frequency. About five rings per canvas height.
uDrift0.9 rad/sPhase speed. The rings travel outward slowly enough to read as a field, not an animation.
uCell / uGap12px / 3pxReadout pitch and gap - a 9px cell with a 3px gap, exactly the segmented bar.
uReach0.14 heightsRadius of the readout around the pointer. It grows in with the pointer's spring.
uThresh0.6Field level above which a readout cell lights. Each cell samples the field once, so it is either lit or not.
uGround / uInk / uSignaltokensRead from the live values, and re-read on every theme flip.
uHair--hairline alphaContour and outline strength, taken from the token so the lines match every other hairline.
springk 60 / d 10The pointer is followed on a spring, so the reach has mass and settles instead of snapping.
The flat-marks rule is structural here, not a matter of care. The shader composites exactly four things - --ground, the hairline mix of --ink, --ink, and --signal - and every readout cell samples the field once, so it can only be fully lit or dark. There is no path for a glow or a fade to reach the screen. The signal hue appears only while the pointer is present, so at rest the panel obeys the same live-only rule as everything else. The canvas is transparent until its first frame, stops rendering when scrolled off screen, and under prefers-reduced-motion draws one settled frame and never starts a loop.

Where it belongs: an empty hero frame, or a schematic slot that has nothing to show yet. Not behind readouts or body text - contours under a feed row compete with the dotted leaders and cost the dim ink its contrast.

SEC.07

Components

6 / ALL STATES LIVE

Every state here is live: hover the buttons and rows, press and hold, tab to focus, tick the toggles, type in the field. The disabled specimens are actually disabled.

ACTIVE READY INACTIVE

STATUS_CHIP / SIGNAL = LIVE, INK = READY, GHOST = INACTIVE

BUTTON / HOVER FLIPS, :ACTIVE 1PX, DISABLED DASHED

CHANNEL_MODE

TOGGLE / CHECKED = SIGNAL TICK + INK TEXT

  • NODE_ALPHASYNCED
  • NODE_BRAVOHOLD
  • NODE_CHARLIEQUEUED

LIST_ROW / HOVER = PANEL FILL, .IS-HOT PINS IT

INPUT / UNDERLINE, FOCUS = INK LINE, SIGNAL CARET

DISABLED = DIM INK, DASHED / BLOCK CARET SPECIMEN

Every state is carried by a flip, and the flips are ordered. Rest to hover swaps a fill (--panel) or the block colour (ink to signal); press moves 1px; disabled trades the solid for a dashed hairline. Because each state changes exactly one property, the states stay readable over any footage - and the signal hue only ever appears on the state that means "this is happening now".
SEC.08

Motifs

8 MARKS

The eight marks everything else is built from. These - not the palette - are what make a screen read as STRATOS at a glance.

> LIVE_FEED BLOCK_PROCESS
+ AUX_CHANNEL STANDBY_LINK

TAG_CHIP / INK, SIGNAL, OUTLINE, GHOST

HAZARD_STRIPE / 10PX, 6PX

SEGMENTED_BAR / INK, SIGNAL, TALL

89 402

BIG_READOUT / SIGNAL, INK

CORNER_BRACKETS / RULE_END_TICKS

MARKERS / CROSS, SQUARE, TRIANGLE

SUB_SCHEMATIC / SEC 1..4

SCHEMATIC_PLACEHOLDER

  • FREQ42.08HZ
  • RANGE409PX
  • OFFSET-2.1PCT

FEED_ROW / MARKER, LABEL, LEADER, VALUE

Every mark is a rectangle, a 1px line, or a triangle - and nothing else. That is what lets them be combined without a style guide for each pairing: a chip next to a segmented bar next to a readout always agrees, because they are all drawn from the same three primitives in the same two colours. Before adding a ninth mark, ask whether it can be built from those three.
SEC.09

Composition

SPECIMEN

The parts assembled into one console: a bracketed frame, a lockup head, three columns of readouts and controls, a log foot. The labels are generic channel, level and mode names, so what a reader takes away is the arrangement, not a guess at what it monitors.

UNIT.3 CHANNEL_OVERVIEW
ACTIVE.B > LIVE_FEED
CHANNEL_SET
  • CHANNEL_A409
  • CHANNEL_B421
  • CHANNEL_C51.6PCT
  • CHANNEL_D7.66
  • CHANNEL_E92.9

SAMPLE 0042.7741 / SOURCE NODE.4 / RESIDUAL 0.002

BLOCK_SCHEMATIC / SEC 1..4

LEVEL_A
LEVEL_B / ALERT
WINDOW / MIN

12

CHANNEL_MODE

LOG 22:14:07 ACK / 22:14:09 MODE SHIFT B / 22:14:12 BLOCK SEC.2 NOMINAL / 22:14:15 QUEUE 3 CMD

ANATOMY
PartAs builtWhy it is that
Frame.s-frame on --panelFour 12px corner brackets instead of a box. The block reads as one instrument without an edge that would cut into the footage behind it.
Head.v-display-md + .v-labelLockup left, status chips right. The lockup names the unit; the chips say what it is doing.
Hazard.s-hazard--thinTop and foot of the console. It marks the extent of the readout, not a warning - which is why it is the thin cut.
Feed column.s-feedMarker, label, dotted leader, value. The leader carries the eye across, so labels and values can sit at opposite edges.
Centre column.s-schem + .s-segA slot for an image and the levels that describe it. The schematic placeholder is what the slot looks like empty.
Signal spendlive states + hazardsThe live chip, one feed row, one level bar, one readout, the checked tick and the schematic pip - each a live state - plus the two hazard strips that bound the block. Everything else is ink. Count the signal before shipping a screen.
Controlstoggle, input, buttonsBottom-right, after the readouts. You read an instrument before you operate it.
Log foot.v-microThe dimmest, smallest voice closes the block, so the eye lands on the readouts first and the log last.
This is a specimen, not a screen from a product. The channels, levels and modes are deliberately nameless, so the section still makes sense to someone building a dashboard, a game HUD or a title sequence. What it teaches is the order - frame, head, readouts, controls, log - and how little of the signal hue a full console actually needs.
SEC.10

Rules

THE REFUSALS MATTER MORE

DO

  • Spend the signal hue on live things only: active, selected, focused, alarming.
  • Keep every mark flat: 1px lines, solid blocks, square corners.
  • Keep text at --ink-dim or brighter. There is no darker grey.
  • Use the naming grammar everywhere, specimen data included: underscores, WORD.DIGIT, values with a unit suffix.
  • Change one property per state, and flip it instantly.
  • Check both grounds with the toggle. Daylight is hand-authored, not derived.

DO_NOT

  • Add a second hue. The moment there are two, neither means live.
  • Add glow, blur, shadow, radius or a gradient fade. The hazard stripe is hard-stop strips and the only gradient.
  • Set signal text below 14px bold, on either ground.
  • Ease a state change, or animate anything for flavour.
  • Name a token after its hue. On daylight glass the signal is a different cut and the ink is black.
  • Run the interference contours behind readouts. It is an empty-frame treatment, nothing more.