Objekt
OBJEKT
REV.05VOL.1
SERIAL: 000-001 · QTY: 4000 · 0100 1100 0010
0 0 0 0 0 1 - 0 0 0 0 1
01/004 LEAD STOCK
SYSTEM
REV.02VOL.1
SERIAL: 000-002 · QTY: 2600 · 0101 0011 0001
0 0 0 0 0 1 - 0 0 0 0 2
02/004 MARK STOCK
MODULE
REV.07VOL.2
SERIAL: 000-003 · QTY: 1200 · 0100 1101 0100
0 0 0 0 0 1 - 0 0 0 0 3
03/004 PLATE STOCK
KINETIC
REV.01VOL.2
SERIAL: 000-004 · QTY: 0800 · 0100 1011 0110
0 0 0 0 0 1 - 0 0 0 0 4
04/004 BASE STOCK

Every element is a printed label.

OBJEKT is a brutalist industrial label system. Buttons are stamps, values are serials, panels are paper stock, and the page is a concrete sheet inside a black press frame. Print, not screen.

Two things to hold on to. Colour is material: four stocks and their inks are the whole palette, and there is no accent hue to reach for. And depth is a hard offset shadow: a sticker lifts off the sheet with zero blur, or it lies flat. Nothing in between.

Read this first

Handling instructions / 6 items
  1. These values are the system. Every token below exists in css/objekt-core.css. Use them; do not invent parallel ones.
  2. Pick a stock before you pick a colour. A surface is lead, mark, plate or base, and the stock class sets its ink. Never set text colour on a label by hand.
  3. No radius, no blur, no gradient, no opacity. Disabled is a pre-mixed solid ink, not a faded one. These four refusals are the silhouette.
  4. Search for an existing label before building a second one. The strip, the plate, the stamp and the serial plate cover almost everything.
  5. Token names are roles. --stock-lead is the loudest label, not the colour black - on the night sheet it is the palest thing on the page.
  6. Both sheets, always. Day and night are hand-authored and nothing warns you if you only checked one. Flip the sheet.

Colour

SEC.01 / 10 - 16 ROLE TOKENS

Sixteen role tokens and no accent. Each swatch shows the day sheet on the left and the night sheet on the right, so both are visible without flipping. The night sheet is hand-authored: the lead stock turns pale so it stays the loudest label, and the other three stocks darken under a light ink.

The sheet and the frame

--groundThe sheet every label is stuck to.#D7D5D0#1F1E1B
--frameThe press frame, and every hard lift shadow.#0E0E0E#080808
--shadeThe resting shadow a label casts on the sheet.#BCBAB4#0A0A09
--frame-inkRegistration marks and edge captions on the frame.#B9B5AA#8F8B81

The four stocks

--stock-leadThe loudest label: section strips, primary stamps, error stamps.#161616#E6E2D8
--stock-markMarking stock: tags, secondary stamps, notes.#C7AC83#4F412E
--stock-platePlate stock: technical and serial labels.#A4A8AB#3C4044
--stock-baseBase stock: forms, tables, anything read at length.#EDEAE2#35342F

The inks

--inkInk on mark, plate, base and the sheet.#1A1A1A#ECE8DE
--ink-2Secondary step of the same ink. Never a mid grey.#34312B#BDB8AC
--ink-disDisabled ink on base stock, pre-mixed solid.#989791#7A776E
--ink-dis-markDisabled ink on mark stock.#7E7059#837154
--ink-dis-plateDisabled ink on plate stock.#6D7072#71757A
--ink-on-leadInk on lead stock.#EAE7DF#161616
--ink-on-lead-2Secondary ink on lead stock.#B9B5AA#3E3A33
--ink-on-lead-disDisabled ink on lead stock.#6B6A66#8A877F

The stocks as labels - these follow the sheet

Lead
STOCK--stock-lead
INK--ink-on-lead
INK 2ND--ink-on-lead-2
ROLESTRIPS, STAMPS
Mark
STOCK--stock-mark
INK--ink
INK 2ND--ink-2
ROLETAGS, NOTES
Plate
STOCK--stock-plate
INK--ink
INK 2ND--ink-2
ROLETECHNICAL
Base
STOCK--stock-base
INK--ink
INK 2ND--ink-2
ROLEFORMS, TABLES

Contrast floor

PairDayNightRule
--ink on --stock-base14.5:110.2:1Reading surfaces get the widest margin.
--ink-2 on --stock-mark6.0:15.0:1The tightest body pair in the system, and still above AA 4.5:1.
--ink-2 on --stock-plate5.4:15.3:1Secondary text on plate stock.
--ink-on-lead-2 on --stock-lead8.8:18.7:1Secondary ink on the loudest label.
--ink-dis*2.1 - 3.3:12.1 - 2.8:1Disabled only. Always paired with a dashed edge, so the state never rests on contrast alone.
Why Secondary text is always a step of the stock's own ink, never a mid grey. A mid grey on mark or plate stock sits at the same luminance as the paper and disappears; --ink-2 is a darker step of the ink itself, so it clears 4.5:1 on every stock on both sheets. And disabled is a pre-mixed solid rather than an opacity, because a translucent ink would pick up whatever stock it sits on and read as a different colour on each one.

Typography

SEC.02 / 10 - 3 VOICES

Three voices, one job each. Display is the stamp, ultra-heavy and condensed, often run vertically up a strip. Data is the serial: every number on the sheet is mono, uppercase, tracked wide. Fine print is the legal band: small, condensed, justified.

Voice 01 / display - Anton, uppercase, -0.01em

Specimen 01

Strip words, section strips, stamp buttons. Often set vertically to run up a strip.

Voice 02 / data - ui-monospace, 0.12em

SERIAL: 000-001
QTY: 4000
BATCH: A-01 / SHEET: 01
0100 1100 0010 0110

Serials, quantities, binary strings. Every number on the sheet speaks in this voice.

Voice 03 / fine print - condensed sans, justified

Specimen fine print. This block stands where a legal band or a handling note would go on a real label. It is set small, condensed and justified so that it reads as a texture first and as text only when someone leans in. It never carries anything a reader must see at a glance; that belongs to the display and data voices above it.

Legal bands, handling notes, micro copy.

At real size

strip word / clamp(56px, 7.2vw, 92px) / 1.0
Strip
section strip / clamp(20px, 3vw, 30px) / 1.0
Section heading
stamp / 14px / +0.01em
Stamp button
value / mono 13px / 0.08em
Field value 000-001
data / mono 10px / 0.12em / 1.7
Serial: 000-001 · qty: 4000
label / mono 9px / 0.14em
Plate caption, badge, field label
digits / mono 9px / 0.28em
0 0 0 0 0 1 - 0 0 0 0 1
body / fine 14px / 1.45
Running text on the sheet, set in the condensed fine stack.
fine / 10.5px / 1.5 / justified
Fine print, the legal band under everything else.
TokenStackJob
--font-display"Anton", "Arial Narrow", ImpactStamps and strips. Weight 400 only - Anton has one weight, and that is the point.
--font-monoui-monospace, "SF Mono", Menlo, ConsolasEvery number, caption, badge and field value. The platform mono, nothing to download.
--font-fine"Arial Narrow", "Helvetica Neue", ArialBody text and the fine-print band. Condensed so it sits beside Anton without looking wide.
Why Small type opens up; large type closes in. Mono captions run at 0.12 to 0.28em and the display face at -0.01em. On a real label the big word is stamped and the small data is typed by a machine, and the two trackings reproduce exactly that difference. It is what lets a 9px caption read as machine data instead of as fine print.

Space and layout

SEC.03 / 10 - ONE SHEET

A black frame, a concrete sheet inside it, and one centred measure on the sheet. Spacing is a short ladder of small steps; the large gaps are between sections, where a lead strip does the dividing.

Steps in use

44px
66px
88px
1010px
1212px
1414px
1616px
2424px

Measure and breaks

--frame-w28 / 20 / 14pxThe press frame. Narrows at 900px and again at 720px.
sheet padclamp(16px, 4vw, 56px)Side margin of the sheet inside the frame.
measure1120pxMax content width, centred on the sheet.
section gapclamp(40px, 6vw, 72px)Above every section strip.
plate pad16pxInside every plate. Strips use 14px.
break 900900pxFrame drops to 20px.
break 720720pxFrame drops to 14px, edge captions go, crosses shrink to 9px.
Why The frame is part of the layout, not a border around it. It is what makes the page read as one printed sheet rather than a web page, so it narrows on small screens but never disappears. Registration crosses stay at every width; only the edge captions drop, because at 14px there is no room to set them.

Form

SEC.04 / 10 - RADIUS 0

Every corner is square. The silhouette comes from rule weight and from the hard shadow of a lifted sticker - four line weights, three shadows, and no blur on any of them.

Line weights

thin1px
Table rows, badges, serial rows.
stamp1.5px
Index stamps, serial plates.
edge2px
Button edges, field underline, checkbox, focus.
--rule-w3px
The thick rule, table tops, error underline.
void1.5px dashed
Disabled. A state, never a style.

Shadows and corners

strip rest6px 6px 0 --shade
A strip label resting on the sheet.
plate rest4px 4px 0 --shade
A plate resting on the sheet.
--lift4px 4px 0 --frame
A sticker peeled up: translate(-2px, -2px) plus this.
radius0
Everywhere, including inputs.
Why Two shadow colours, two meanings. --shade is a label lying on the sheet: soft in tone, never in edge. --frame is a label peeled up toward you, so its shadow is the darkest thing on the page. Keep them apart and a reader can tell resting from lifted without being told; blur either one and the page stops being paper.

Motion

SEC.05 / 10 - ONE MOMENT

Print does not move. The system has exactly one authored motion - the sticker lift - and everything else changes state instantly. Hover the stamp below, then press it.

Live - hover, press, tab to it

--t-lift120msThe lift, on transform and box-shadow only.
--ease-liftcubic-bezier(0.2, 0.9, 0.2, 1)Fast out, hard landing. The only curve.
hovertranslate(-2px, -2px)Plus --lift. The largest movement in the system.
activetranslate(0, 0)Pressed flat, shadow gone.
checkboxinstantThe X is stamped, not drawn.
Why A stamp lands, it does not glide. The curve front-loads almost all of the movement, so the lift feels like a thumb peeling a sticker and the press feels like it hitting the sheet. Anything slower reads as a screen animation. Under prefers-reduced-motion the transition is removed and states still change - nothing here depends on movement to be understood.

Screen

SEC.06 / 10 - ENHANCEMENT ONLY

One optional surface treatment: a thermal head. A sheet of die-cut labels feeds slowly out of the printer, already carrying their index block, data rows and barcode. The pointer is the print head - move it across the right-hand panel and the stock burns in square dots under it. Hold still and it burns solid. What it printed rides up with the paper and cools off.

Static fallback - unprinted die-cut sheet
Live - move the pointer across it
UniformValueWhat it does
uDot4px x DPRThermal dot pitch. Each dot is burnt or not as a whole, with a hairline gap between dots as a real head leaves.
uLabel34 x 22 dotsLabel pitch, so a label is 136 x 88px. The static fallback uses the same pitch.
uFeedPx3 dots/sPaper feed. Slow enough to read as a machine idling, not as scrolling.
uRadius0.075Head reach, in stage heights. Squeezed 2.2x along the feed, because a head is a line across the paper.
uTrail32 x 45msHead samples, stored in sheet space so the print moves with the paper. Each one carries heat 0.34, cooling on a 0.9s time constant.
dither4 x 4 orderedHeat becomes density of burnt dots. There is no grey on a thermal head, so there is none here.
uStock / uInk / uCuttokens--stock-base, --ink and --ink-dis, read live and re-read when the sheet flips.
springk 60 / d 10The head follows the pointer on a spring, so it has the weight of a carriage and settles instead of snapping.
Why The print rules are structural here, not a matter of care. Every pixel the shader writes is one of exactly three token colours - stock, ink or die line - because ink is decided per dot by a hard threshold and never blended. It cannot emit a gradient, a blur or a hue without rewriting its last two lines. It is also enhancement only: the canvas is transparent until its first frame, so a machine without WebGL2 sees the complete static sheet on the left. It stops when scrolled off screen, and under prefers-reduced-motion it draws one settled frame and never starts a loop.

Where it belongs: an empty state, a loading or printing moment, or a hero with nothing else in it. Not behind body text or a form - the printed dots sit at full ink density and would take the contrast the colour section just defended.

Components

SEC.07 / 10 - EVERY STATE LIVE

Every state here is live: hover lifts, press flattens, tab focuses, boxes strike, the field rejects an out-of-range value as you type. The pinned row exists only for side-by-side comparison.

Stamp buttons / live

Disabled / really disabled

Pinned for comparison / rest, lifted, pressed, focus

Rest Lifted Pressed Focus

Lead stock is the primary stamp. Base and mark variants carry a 2px ink edge. Disabled is solid disabled ink plus a dashed edge.

Text field / empty, filled, error, disabled

Rejected: range 0 - 400

Edit the quantity: the REJECTED stamp comes and goes with the value.

Badges / one per stock, and disabled

Lead Mark Plate Base Void Void

Checkbox / a stamp box struck with an X

Spec table / thick top rule, thin row rules

Specimen record
Field oneValue
Field two000-001
Width100 MM
Height62 MM
StockBase
Index01/004

Keys in the fine voice, bold, left. Values in mono, right. Every row ruled in ink, never in a grey.

Why Errors are stamps, not colours. With no red to reach for, a rejected field thickens its underline to 3px and gets a lead-stock stamp naming the problem and the valid range. That works on both sheets, in greyscale, and for a reader who cannot tell hues apart - which a red underline never did.

Motifs

SEC.08 / 10 - 7 MARKS

The marks of industrial print. These, more than the palette, are what make the system recognisable at a glance - all of them drawn in currentColor, so each one inherits the ink of whatever stock it lands on.

Barcode / two cuts

0 0 0 0 0 1 - 0 0 0 0 1
A - 0 1 / 0 0 0 0 1

Index stamp / serial plate

01/004 04/004

SERIAL: 000-001
BATCH: A-01
SHEET: 01 OF 04
CHECKED 2026-09

Registration / rules

Crosses sit at the frame corners. Thick rules are 3px with "I" end ticks; thin rules are 1px row separators.

Technical drawings / patent line art, 1.4px currentColor strokes

The strip label - the card primitive

LABEL
REV.01VOL.1
SERIAL: 000-005 · QTY: 0100 · 0110 0001
0 0 0 0 0 1 - 0 0 0 0 5
05/005 SPECIMEN

A tall narrow column in one stock, stacked top to bottom: the giant vertical display word, a thick rule, the revision and volume tag, a rotated data column beside a technical drawing, a barcode, and an index stamp. Every other motif on this page is a part of this one.

widthmax 220pxStrips sit in a row of up to four.
word areamin 300pxThe word is the label; the rest is data under it.
data columnvertical-rl + rotate(180deg)Reads bottom to top, as print on a spine does.
Why Every motif is drawn in currentColor. A barcode on lead stock is pale, on mark stock it is dark, and on the night sheet both flip - with no motif knowing which stock it is on. Hardcode one stroke and it becomes the single mark that vanishes when the sheet flips.

Composition

SEC.09 / 10 - SPECIMEN

The parts assembled into one record: a lead strip to name it, fine print, a spec table, options, and an action row, with a data label pinned beside it. The copy is placeholder and describes a label, so what a reader takes away is the arrangement.

Specimen 01 Record title

Specimen fine print. A short description sits here in the fine voice, justified, under the lead strip and above the table. It is the one paragraph on the record, and it never runs wider than sixty characters.

Specification
Width100 MM
Height62 MM
StockBase
Rule3 PX
BatchA-01

Options

Anatomy

PartAs builtWhy it is that way
Recordplate stock-baseAnything read at length sits on base stock, the pale reading surface with the widest contrast margin.
Name stripapp-head stock-leadThe only lead stock on the record besides the primary stamp. It names the thing, then gets out of the way.
Fine printt-fine, 60chOne paragraph, capped. A label with two paragraphs is a document and wants a different layout.
Spec tablespec-tableThe 3px top rule is the section break inside the record; rows break on 1px. No whitespace doing a rule's job.
Action rowfield + btn + btn-baseOne lead stamp per record. A second one leaves the eye with no idea which is primary.
Data labelaside, 1fr of 3Serials, badges and barcode live beside the record, not in it - data a machine reads is kept apart from text a person reads.
Figureplate stock-markA change of stock separates the illustration from the record without a border or a heading.
Why Note what this is not: a product page with the copy swapped out. The record describes a label - width, height, stock, rule - precisely because that says nothing about what the system is for. A reader in any industry leaves with the same thing: where the lead stock is spent, and how the stocks alternate.

Rules

SEC.10 / 10 - THE REFUSALS MATTER MORE
Pass
  • Use hard edges and hard offset shadows. Zero blur, always.
  • Pick a stock class and let it set the ink, secondary ink and disabled ink.
  • Spend lead stock sparingly: section strips, the primary stamp, error stamps.
  • Draw every mark in currentColor so it follows the stock and the sheet.
  • Mark disabled with a dashed edge as well as a lighter ink.
  • Check both sheets with the masthead flip before shipping anything.
Rejected
  • No gradients, no border-radius, no blur, no soft shadows.
  • No transparency or opacity effects. Disabled inks are pre-mixed solids.
  • No accent hue, not even for errors. Errors are stamps.
  • No mid-grey text on mark or plate stock. Use the stock's own --ink-2.
  • No token named for a hue or material. One sheet flip and the name is a lie.
  • No glows, glass, rounded chrome or decorative motion. And no thermal head behind body text.